Item # PLN-D2, Portable Battery Powered Load Indicator (3-1/2 Digit, Handheld) on Strainsert Co.


	STRAINSERT…. FOR SUPERIOR INTERNALLY GAGED FORCE TRANSDUCERS Phone: 610-825-3310 Email: info@strainsert.com

All Categories > Instruments > Portable Battery Powered Load Indicator (3-1/2 Digit, Handheld) > Item # PLN-D2

Download PDF Print

Printable Page Email

Email This Page

Save To Favorites


	Item # PLN-D2 Portable Battery Powered Load Indicator (3-1/2 Digit, Handheld)

Download PDF

Email This Page

Save To Favorites

larger image

Indication is direct. No multipliers are required, thus avoiding ambiguous readings. Resolution is from 1 pound to 1000 pounds depending on the load capacity of the transducer. Alternate display units are available.

Operation is extremely simple. For normal use only two controls are involved. Turn on the power switch, set no load balance, and begin reading applied loads.

A calibration check function is included to provide a quick test of the transducer and instrument integrity.

The readout system is fully contained in a cast metal case that is both rugged and durable.

Power is provided by a set of rechargeable batteries. Batteries and a recharger with retractable 120 Vac power cord, are included within the housing.

Battery power allows complete freedom of use and provides 5-10 hours of continuous use depending on transducer resistance. A ratiometric measuring technique prevents battery decay from degrading system accuracy.

When battery voltage has decreased below a functional level, a visual display (flashing “:”) signals that recharging is needed.

Recharging is done by withdrawing the line cord from its sealed compartment and plugging into a standard 110 Vac wall receptacle. Batteries are completely recharged overnight and can be left “on charge” indefinitely.

Nickel Cadmium Batteries and Recharger included.
Transducer cable connector: PT06A-10-6P(SR)
Visual Display of Low Battery, Over Range, Polarity.

For Full configuration click Request Information button.

Specifications

Display		3-1/2 digit, one or two dummy 0’s optional.

Display Accuracy		±1 count

Display Size		1/2 inch Liquid Crystal Display

Zero Balance Range		±20% full scale (FS)

Calibration Check		Preset to approximately 80% F.S.

Case Size		5” x 7-1/2” x 2”

Weight		2-1/2 lb

Display Units of Load Capacity		Kilo-Pounds [KIPS] Newtons [N] Other Units Pounds [lb]

Sensitivity		0.5-mv/V (minimum)

Bridge Resistance		350 Ohm 120 Ohm

MORE IMAGES


	· PLND2 with CPA Clevis Pin

	· Resolution

DOWNLOADS


		Standard Wiring Diagrams (PDF, 600KB)

		PLN-D2 Ordering Information (PDF, 357KB)

Accessories


	Bx6P Mating Connector/Plugs

Contact Strainsert
For information on load pins, force sensing bolts, load cells, tension links, signal conditioners or our high quality custom products, Contact Us for further assistance.

Item # PLN-D2 Portable Battery Powered Load Indicator (3-1/2 Digit, Handheld)

Display

Display Accuracy

Display Size

Zero Balance Range

Calibration Check

Case Size

Weight

Display Units of Load Capacity

Sensitivity

Bridge Resistance